SCDA127R 、SCDA127R/N 、SCDA131R/P 、SCDA131R/N have manual/automatic reset function and are safety relay modules in accordance with ISO 13849-1 category 4. Input: The safety relay module has three different input wiring configurations, one normally closed, two normally closed or two outputs of the light curtain (SCDA127R connected to PNP signal, SCDA127R/N connected to NPN signal, SCDA131R/P connected to PNP signal, SCDA131R/N connected to NPN signal). When connecting with two normally closed modes, the safety relay module checks for cross-faults between the two inputs. When connected to a light curtain, the light curtain must have the function of performing cross-fault detection.

SLC series light curtain is Type 4 safety light curtain which conformed to international safety standard EN61496-1/2. SLC safety light curtain builds a safe workplace to customers. It iswith the following advantages： ◆ System Failure detection SLC series of safety light curtain is with CPU self-test function, when their own failure (such a s the light is not synchronized, the light intensity is not enough, cast li ght drive circuit error, the main control circuit error, cable problems, and receive drive circuit error, CPU error) to ensure that the equipment is not issued to the wrong status, to ensure product safety.

SLC series light curtain is Type 4 safety light curtain which conformed to international safety standard EN61496-1/2. SLC safety light curtain build s a safe workplace to customers. It is with the following advantages： ◆ System Failure detection SLC series of safety light curtain is with CPU self-test function, when their own failure (such as the light is not synchronized, the light intensity is not enough, cast light drive circuit error, the main control circuit error, cable problems, and receive drive circuit error, CPU error) to ensure that the equipment is not issued to the wrong status, to ensure product safety.

LCS series safety grating is a new type of through-beam safety photoelectric protection device developed and developed using the current international advanced technology. The smallest cross-section in the industry is 15×15mm. It has the characteristics of high safety and high reliability through ISO13849-1 PLe and EN61496-1/2 Type4 certification. At the same time, the structure is compact and the shape is slender, and it can achieve single-end without blind spots. Professional optical design and circuit design make the safety grating have very good resistance to electromagnetic interference and ambient light interference, so it can be used in many harsh environments and structurally restricted areas.

LCM series miniature safety grating is a new type of antiradiation product developed with foreign advanced technology. Taking into account the economy and safety, the product has passed the European CE certification (EN1496-1/2) safety level four. It has strong stability and can completely replace the corresponding imported products, such as: GL-S series, SAS series, PJV series, C4C series, etc. It has been widely used in assembly lines, injection molding machines, hydraulic presses, and other automated special equipment. This grating has the following characteristics:

◆Three scanning modes: direct scan, single side scan, double side scan ◆Up to 20 measurement modes: FBB, LBB, TBB, MBB, FBM, LBM, TBM, OD, ID, CBB, CBM, CFBB, CLBB, O1FBB, O1LBB, O2FBB, O2LBB, O3FBB, O3LBB, TRN ◆Three output modes: 2-way independent level output, 2-way independent analog output, standard Modbus 485-RTU serial output ◆5mm minimum detection target or 2.5mm edge resolution, depending on the scanning method ◆The distance to light ranges from 400mm to 4000mm, and the beam interval is 5mm ◆Supplied with PC-side host computer software, which can perform advanced configuration and work monitoring on the grating ◆Supplied with the Android system APP, the grating can be configured through wireless infrared communication A remote configuration line is used to configure some simple functions: scanning mode, shielding setting, alignment calibration, gain setting, digital tube display direction, infrared communication on/off

The TRLl andTRL3 series safety door locks are based on RFID radio frequency induction coding technology and use a monitored stainless steel lock bolt mechanism for a protective doo「device involving personal or machine safety. Safety Level S1L3 or Ple can be achieved with safe dual-channel output technology and can be used with safety latch.

TML series security door locks are the most commonly used door interlocking technology. They use a key mounted at the opening of the switch body to detect the movement of the protective door. Due to their small and lightweight form factor, variety of contact configurations, and locking function, safety latches are often the lowest cost solution. Moreover, thanks to the use of flexible keys, their misalignment tolerances are increased, so they can be used in a wide range of applications. TML series security door locks allow the switch head to press 90. The angle is rotated 4 times, the key can be inserted into the switch in different positions, and the electromagnet can choose to work on and off the power, which provides a variety of different options for the way the switch works and the installation method on the protective door. This increases the flexibility of the switch and makes it ideal for use on a wide range of doors.

The design of TMC3 magnetic code safety switch combines multiple magnetic sensitive elements, these magnetic sensitive elements parts must be triggered in a specific order to work normally, non-contact execution, and has a high misalignment tolerance, detection range is large, easy to install, can be multiple series, TMC3A2C/TMC3B2C can be used with SCDA127R security module up to level 4 safety level, through the CE certification, in line with ISO 13849-1 SIL3 PLe. Category 4.

TEM01 series RFID safety switch based on RFID technology safety switch compared with mechanical switch or magnetic switch, has the characteristics of detection confidentiality (can provide unique code), strong anti-interference, safety and reliability. The use of safety dual- channel output technology can reach the safety level PLe, which can effectively prevent false alarms or false alarms, or abnormal triggers. Can be used with safety latches.

SLC-AD safety grating is a design that adopts the most advanced international functional safety concepts and technologies, in accordance with PLe, SIL3 mechanical safety level, safety grating in accordance with EN/IEC 61496-1/-2 Type4 safety level. Providing customers with a safe workplace has the following advantages.

SLC long -range security light curtain is a new type of radio safety product developed and developed by advanced technology. The light curtain itself has high safety. All products have the following advantages

The SA4S Enhanced Safety Light Curtains are advanced safety devices designed for industrial applications.

The SA4C Standard Safety Light Curtain is a crucial safety device widely used in industrial settings.

Complete certification： The full series of safety grating, safety relay, safety door locks, and door magnetic switch products meet the national CNAS unified certification standards, obtain ISO9100 quality management system certification, and have CE, PLE, PLD, Reach, EMC, ROHS, FCC and other certification and test reports.